收藏本站
Cerebot 32MX7 Reference Manual
J20
JP1 &
JP2
JP3 &
JP4
JP5
JP6
JP7
JP8
JP9
JP10
JP17
JA-JF
JPA –
USB Host Connector
This is a standard sized USB type A connector. This connector is used to connect USB
devices to the board when using the PIC32MX795 microcontroller to implement an
embedded USB host.
CAN or Pmod Select
These jumpers select microcontroller signals RF12 and RF13 for use with CAN #1 or Pmod
connector JF. Place these jumpers in the CAN position to use CAN #1. Place the jumpers in
the PMOD position to use then with Pmod connector JF.
Pull-up enable for I2C port #2
These two jumpers are used to enable/disable the pull-up resistors on I2C port #2. Insert
shorting blocks on these two jumpers to enable the pull-up resistors. Remove the shorting
blocks to disable the pull-up resistors. Only a single device on the I2C bus should have the
pull-up resistors enabled.
CAN #1 Termination
This jumper is used to enable/disable the 120 ohm termination resistor for CAN #1. Insert the
shorting block to enable the termination resistor, remove it to disable the termination resistor.
CAN #1 5V0 Enable
This jumper is used to enable/disable providing 5V to the CAN #1 connector. Insert the
shorting block to connect the board 5V0 supply to pins 9 & 10 of CAN #1 connector. Remove
the shorting block to disconnect the 5V0 supply.
CAN #2 Termination
This jumper is used to enable/disable the 120 ohm termination resistor for CAN #2. Insert the
shorting block to enable the termination resistor, remove it to disable the termination resistor.
CAN #1 5V0 Enable
This jumper is used to enable/disable providing 5V to the CAN #1 connector. Insert the
shorting block to connect the board 5V0 supply to pins 9 & 10 of CAN #1 connector. Remove
the shorting block to disconnect the 5V0 supply.
Do Not Use
USB host power select
This jumper is used to select which host connector is powered when host power is enabled.
Place the shorting block in the “MICRO” position to supply power to the USB micro-AB OTG
Connector, J19. Place the shorting block in the “A” position to supply power to the USB type
A Host Connector, J20.
Do Not Use
Pmod Connectors
These connectors provide access to the I/O pins on the PIC32MX795 microcontroller.
Digilent Pmod peripheral modules can be attached to these connectors.
Pmod header power select
www.digilentinc.com
page 18 of 19
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
TEACLIPPER-PIC-HV-PT PROGRAMMER TEACLIPPER/PIC HI-V
TJA1010T/N1,118 IC OCTAL LOW SIDE DRVR 28SOIC
TLC5945PWP IC LED DRIVER LINEAR 28-TSSOP
TLD1020-12 POWER SUPPLY 20W 12VDC 1.66A
TLD1020-24-C0350 POWER SUPPLY 20W 12-24VDC .350A
TLD1020-24-C0700 POWER SUPPLY 20W 12-24VDC .700A
TLD1020-24 POWER SUPPLY 20W 24VDC .830A
TLD1020-36-C0350 POWER SUPPLY 20W 18-36VDC .350A
相关代理商/技术参数
TDGL005 功能描述:子卡和OEM板 chipKIT Basic I/O Shield RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
TDGL006 功能描述:界面开发工具 chipKIT Network Shield RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V
TDGL007 功能描述:开发板和工具包 - PIC / DSPIC DIGILENT CEREBOT MC7 MOTOR CONTROL BRD RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
TDGL008 功能描述:开发板和工具包 - PIC / DSPIC Digilent Cerebot MX3ck Dev Brd RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
TDGL009 功能描述:开发板和工具包 - PIC / DSPIC Digilent Cerebot MX4cK Dev Brd RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
TDGL010 功能描述:开发板和工具包 - 其他处理器 Digilent Cerebot MX7cK Dev Brd RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
TDGL011 功能描述:MODULE DIGILENT PMOD WIFI RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:Digilent 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
TDGL012 功能描述:MODULE DIGILENT PMODRF2 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:Digilent 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796